R-and-D - Hi-Tech Products

R&D:	R-and-D Research & Development Specialty/Hi-Tech Products & Fluids Systems Published Patents & Papers Supported Research Projects

Our research department has developed different specialty and Hi-Tech Chemicals and Fluids systems to meet operational requirement.

I. Specialty Chemicals

· High Performance Biocide

· High Performance Corrosion Inhibitor

· Drilling Detergent

· High Performance Drilling Lubricant

· Drilling Foamer

· Drilling Glycol

· Pipe Free HP or Pipe Free

· Alcoholic Defoamer

· ROP Enhancer

· WBM Emulsifier

High Performance Biocide
BIOCIDE HP	BIOCIDE HP is designed to control of bacterial growth in waters associated with petroleum production.
BIOCIDE P	This powder additive has antibacterial activity, consequently increase the whole polymers stability in drilling fluids too.

High Performance Corrosion Inhibitor
BRINE-COR	High activity, water-soluble corrosion inhibitor and microbiostat, provides corrosion protection for oil and gas industry application, effective in water based muds and completion/workover fluids, may absorb on the active solids in the drilling fluid.

Drilling Detergent
CLEAN SURF	CLEAN SURF is designed to makes clean-up easy and efficient by releasing the material from the surfaces of drilling equipment.
RIG-WASH	This liquid additive is designed to keeping equipment clean, safe, and operating with efficiency.

Drilling Foamer
FOAMER	FOAMER is a concentrated water soluble foaming agent designed for use in air/mist drilling operations.

High Performance Drilling Lubricant

ECO-LUB HP

- A biodegradable, water dispersible cost/effective lubricant for water based drilling fluids.

- Effectively reduces the friction coefficient of the wall cake and lessens the possibility of differentially stuck pipe.
- Effectively reduces the friction coefficient of the wall cake and lessens the possibility of differentially stuck pipe.

Drilling Glycol
GLYCO-DRILL	Provides wellbore stability, lubricity & high filtration control. While polyglycols are most effective when used in conjugation with an inhibitive salt, such as KCl, in a non-dispersed polymer system, they can be used as additives in most water-based systems.

Pipe Free HP or Pipe Free
PIPE FREE HP	PIPE-FREE HP is a specially formulated blend of surfactants designed to break down filter cake, and free stuck pipes in water based drilling fluid systems.

Alcoholic Defoamer

DEFOAM ALC

- Effective at eliminating foam associated with mixing and circulating brines and also will control foaming in dispersed and non-dispersed drilling fluid

- DEFOAM ALC is effective at high temperature and at different pH of water based mud.

DEFOMIX
^(Defoamer ^& ^Biocide)

- Particularly effective because of its ability to kill a wide range of Microorganisms in most water systems.

- Effective at high temperature and at different pH of water based mud.

- Normally utilized in controlling foam in brines and is effective in most water-base drilling fluid system.

ROP Enhancer

ROP ENHANCER

- Engineered to eliminate balling and improve drilling rates even in highly reactive shales.

- Minimize friction and reduce bit bailing, clay sticking and other downhole aggravations

- Does not adversely increase rheological properties and usually causes a beneficial decrease in fluid loss.

WBM Emulsifier
WBM EMULSIFIER	Designed to emulsify crude oils and or hydrocarbon solvents into fresh water. It also possesses some shale stabilization properties.

II. Hi-Tech Products

· High Performance Temperature Stabilizers

· High Performance Fluid Loss Controllers

· High Performance Nano-Fluid Loss Controllers

· High Performance Nano-meter Shale Inhibitors

High Performance Temperature Stabilizers
TEMP-STAB MO	Performing as a buffer in order to prevent the pH alternations. So, protects polymers in HPHT circumstances.
TEMP-STAB SS	Having high temperature stability, consequently increase the whole WBM temperature stability too.
TEMP-STAB AS	Having high temperature stability, consequently increase the whole WBM temperature stability too.
TEMP-STAB PS	Elevate temperature stability from low weight and heavy water based mud.
TEMP-STAB L300	Allowing the operator to drill, log, and complete HT wells trouble free up to 400°F with water based mud.
TEMP-STAB L350	Allowing the operator to drill, log, and complete HT wells trouble free up to 400°F (204°C) and over with water based mud.

High Performance Fluid Loss Controllers
TEMP-STAM AS	Having high temperature stability, so acts as FLC additive up to 300 °F and over.
TEMP-STAB PS	FLC additive for drilling fluids ranging from low weight to heavy water based mud.
TEMP-STAB TAIR	FLC additive for drilling fluids ranging from low weight to heavy water based mud.
TEMP-STAB HEM	FLC additive for drilling fluids ranging from low weight to heavy water based mud.
TEMP-STAB ALUM	FLC additive for drilling fluids ranging from low weight to heavy water based mud.
TEMP-STAB MO	Performing as a buffer in order to prevent the pH alternations. So, protects polymers from degradation at high temperatures.
TEMP-STAB SS	Having high temperature stability, so acts as FLC additive up to 300 °F and over.

High Performance Nano-Fluid Loss Controllers
Carbon Nano-structures	High thermal conductivity of these structures introduces them as fluid loss controllers.
Nano-HEM	FLC additive for drilling fluids ranging from low weight to heavy water based mud.
Nano-ALUM	FLC additive for drilling fluids ranging from low weight to heavy water based mud.

High Performance Nano-meter Shale Inhibitors
N-Inhibit I	Provides us with higher shale recovery or shale swelling, lower friction coefficient, more stable rheological properties and better fluid loss control.
N-Inhibit II	Provides us with higher shale recovery or shale swelling, lower friction coefficient, more stable rheological properties and better fluid loss control.
Nano-Alum	Multifunctional Nano additive is used while drilling high pressure high temperature formations while enhancing shale inhibition.

III. Synthetic Polymeric Additives

Synthetic polymeric fluid loss controllers

PAC

Good solubility in saturated salt water, nontoxic and biodegradable material.

When applying in fluid system, does not create stable foam, Good compatibility with any mud system.

CMC

High temperature polymeric fluid loss controllers
AMYLOSE-HT	Good compatibility with high temperature, even higher than 25 without changes in rheological and fluid loss properties.

Advanced Drilling Fluid Systems
PDF Brand Name	Fluid Type	Description	Application
CLAY-BOND FLUID SYSTEM	HPWBM	CLAY-BOND FLUID SYSTEM is a high performance water based mud which contains high molecular polymers to prevent clay dispersion in the mud and changing rheological properties. This system reduces Bit Balling and improve ROP with stable hole condition in high reactive clays.	To inhibit and encapsulate the reactive shale To perform optimum flow properties
SILCO-DRILL FLUID SYSTEM	HPWBM	SILCO-DRILL FLUID SYSTEM is high performance water based mud which is formulated by using silicate derivatives to inhibit high reactive clays and shales.	High Inhibition Good Well Bore Stability
GLYCO-DRILL FLUID SYSTEM	HPWBM	GLYCO-DRILL FLUID SYSTEM is a high performance water based mud used as a replacement for OBM to overcome high reactivity of shale problems by using different types of glycols which are compatible with low to high formation temperatures.	Wellbore and cuttings stability Reduced dilution rate Provide temperature stabilization Minimizing bit balling Increasing ROP Reducing torque and drag
SHALE-DRILL FLUID SYSTEM	HPWBM	SHALE-DRILL FLUID SYSTEM is a high performance water based mud which is formulated by using asphalt additives to improve the stability of drilling fluids, stabilizes shale, inhibits dispersion of drilled solids, controls high temperature water loss in high reactive shales.	Wellbore and cuttings stability Reduced dilution rate Provide temperature stabilization Minimizing bit balling Increasing ROP Reducing torque and drag
ULTRA-INHIBIT FLUID SYSTEM	HPWBM	ULTRA-INHIBIT FLUID SYSTEM is a high performance water based mud system which is formulated by using high performance shale inhibitors for increasing the performance of shale and corrosion inhibition.	Wellbore and cuttings stability Reduced dilution rate Provide temperature stabilization Minimizing bit balling Increasing ROP Reducing torque and drag
LUB-DRILL FLUID SYSTEM	HPWBM	LUB-DRILL FLUID SYSTEM is a high performance water-based drilling fluid system which is formulated for drilling high deviated and horizontal section by using special high performance lubricants to reduce torque and drag and improving ROP during sliding.	Reduce of coefficient of friction Reducing torque and drag Reducing bit balling Reducing differential sticking

Hi-Tech Drilling Fluids
ULTRA-WEIGHT DRILL FLUID SYSTEM	HI-TECH	ULTRA–WEIGHT is a heavy-weight water-based mud which is formulated by using an effective viscosifier to provide flexible, smooth rheological properties in high pressure formations with high calcium/salt water influxes	Prevent the influx of saltwater in high pressure formation
LOW-WEIGHT-DRILL FLUID SYSTEM	HI-TECH	LOW-WEIGHT FLUID SYSTEM is water based mud which is formulated by using special low density additives for the mud weight between 0.8 - 1.0 S.G for drilling low pressure and depleted zones. This system replaces Oil Based Mud.	Reduce of mud density, Eliminate lost circulation, Controlling formation damage No differential stuck pipe
APHRO-DRILL FLUID SYSTEM	HI-TECH	APHRO-DRILL FLUID SYSTEM is water based mud which is formulated based on micro bobble technology to reduce water based mud density between 0.3 - 0.7 S.G for drilling depleted reservoirs in carbonate and sandstone formation.	Reduce of mud density, Eliminate lost circulation, Controlling formation damage No differential stuck pipe
HPHT-DRILL FLUID SYSTEM	HI-TECH	HPHT-DRILL is a high performance HPHT water based mud which is formulated by using special HPHT synthetic polymers and additives to reduce HPHT fluid loss of the system and provide maximum shale inhibition in HPHT wells, and Increasing ROP	Drilling HPHT wells Drilling most reactive shales
S-FORMA-DRILL FLUID SYSTEM	HI-TECH	S-FORMA-DRILL FLUID SYSTEM is a solids free high tech drilling fluids which is formulated by using organic salts to prevent formation damage and corrosion problem associated with the convectional water based mud up to 1.32	Shale stability Temperature stability
P-FORMA-DRILL FLUID SYSTEM	HI-TECH	P-FORMA-DRILL FLUID SYSTEM is a solids free high tech drilling fluids which is formulated by using organic salts to inhibit inter layer clays and to prevent formation damage and corrosion problem associated with the convectional water based mud up to 1.57 S.G	Shale stability Temperature stability
CS-FORMA-DRILL FLUID SYSTEM	HI-TECH	CS-FORMA-DRILLFLUID SYSTEM is a solids free high tech drilling fluids which is formulated by using organic salts to inhibit inter layer clays and to prevent formation damage and corrosion problem associated with the conventional water based mud up to 2.3 S.G	Shale stability Temperature stability
CRYSTAL-DRILL- IN FLUID SYSTEM	HI-TECH	CRYSTAL-DRILL-IN-FLUID SYSTEM is high technology water based mud which is formulated by using special crystallization process to bridge the depleted reservoirs and preventing formation damage and formation losses of fluid. The return permeability test has proven more than 90% recovery in comparison other water based mud.	To drill depleted zones/reservoirs To bridge the reservoir and prevent formation damage

We have successfully replaced oil based mud with glycol based mud in Ahwaz Well No.426 by drilling the Pabdeh, Gurpi and Ilam formations which contain more than 700 meters of highly reactive shales and sticky marls. Our facilities and experience provide us the confidence to conduct research on specific issues in drilling fluids.

language : FA

I. Specialty Chemicals

​

BIOCIDE HP is designed to control of bacterial growth in waters associated with petroleum production.

High activity, water-soluble corrosion inhibitor and microbiostat, provides corrosion protection for oil and gas industry application, effective in water based muds and completion/workover fluids, may absorb on the active solids in the drilling fluid.

CLEAN SURF is designed to makes clean-up easy and efficient by releasing the material from the surfaces of drilling equipment.

FOAMER is a concentrated water soluble foaming agent designed for use in air/mist drilling operations.

- A biodegradable, water dispersible cost/effective lubricant for water based drilling fluids.

- Effectively reduces the friction coefficient of the wall cake and lessens the possibility of differentially stuck pipe.- Effectively reduces the friction coefficient of the wall cake and lessens the possibility of differentially stuck pipe.

Provides wellbore stability, lubricity & high filtration control. While polyglycols are most effective when used in conjugation with an inhibitive salt, such as KCl, in a non-dispersed polymer system, they can be used as additives in most water-based systems.

PIP​E-FREE HP is a specially formulated blend of surfactants designed to break down filter cake, and free stuck pipes in water based drilling fluid systems.