|
Oil and Synthetic |
The OBM-Drill
Is an oil based mud which is formulated by using high performance emulsifiers and fluid loss control additives to provide a higher temperature stability uo to 350°F, shale inhibition reactivity and reducing torque and drag.
|
The SYNTHO-DRILL
Is a high performance synthetic based drilling fluid which is formulated by using degradable synthetic fluids. This system is approved internationally as replacement of OBM is environmentally restricted areas. This system has same shale inhibition performance and temperature stability up to 400°F. This system can be recovered over several usages.
|
The CLAY-BOND / Acryl-Drill
Is a water based mud which is formulated by using high molecular Partially Hydrolyzed Poly Acryl Amid (PHPA) as a shale inhibitor in conjunction with high performance polymeric fluid loss control to stability of the system can go up to 257°F.
|
The SILICO-DRILL System
Is water Based Mud which is formulated by using a silicate component and special polymers to overcome shale reactivity and hole stability. The temperature stability of the system goes up to 300°F.
|
The GLYCO-DRILL (LT/MT/HT) System
Is a high performance water based mud used as a replacement for OBM to overcome high reactivity of shale problems by using different types of glycols and inhibitor salts for low to high formation temperatures to provide stabilization of troublesome shale, minimizing bit balling, increasing ROP and reducing torque and drag. This system has been approved as an environmentally friendly drilling fluids system. The temperature stability of the system goes up to 300°F.
|
The SHALE-FREE System
Is a high performance HPHT water based mud which is recognized internationally as an approved replacement for oil based mud used in deep drilling. This system is formulated by using special types of high temperature synthetic fluids for loss control and formulated Polyols to provide stabilization with troublesome shale, minimizing bit balling, increasing ROP and reducing torque and drag. This system has been approved as an environmentally friendly drilling fluids system. The temperature stability of the system goes up to 325°F.
|
AMINE-Drill
Is a high performance water based mud which is recognized by using amine derivatives and high performance polymeric fluid loss control to provide shale inhibition, hole stability and increasing ROP. The temperature stability of the system goes up to 300°F.
|
The SHALE-DRILL System
is a water based mud which is formulated by using polymeric fluid loss control in conjunction with potassium chloride to provide shale and clay inhibition, hole stability and minimizing bit balling in shale formations. The temperature stability of the system can go up to 275 °F.
|
THE GLYCOMUL System
is water based mud which is formulated by using an emulsifier and a special type of glycol to provide shale inhibition in low-pressure zones with lower mud density. This system provides more lubricity in an environmentally friendly drilling fluids system. The temperature stability of the system goes up to 300 °F.
|
GLYCOSIL
is a water based mud which is formulated by using a silicate component and a special type of glycol to provide shale inhibition in high reactive shale formations, increasing ROP and reducing torque and drag. The temperature stability of the system goes up to 300 °F.
|
HP-DRILL
is a heavy-weight water based mud which is formulated by using special high temperature synthetic fluid loss control to provide flexible, smooth rheological properties in high pressure formations with high calcium/salt water influxes. The system is weighed up to 2.64 S.G (165 PCF) and stable up to 300°F.
|
HPHT-DRILL
is a high performance HPHT water based mud which is formulated by using special HPHT synthetic polymers and additives to reduce HPHT fluid loss of the system and provide maximum shale inhibition in HPHT wells, and Increasing ROP. This system has a temperature stability of up to 375 °F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
