University |
Supervisor |
Year |
Degree |
Researcher Name |
Research Project |
Item |
Islamic azad university, omidiyeh branch | Dr. Rashidi | 2015 | MSc | Mehdi Fattahi | Carbon Nanostructures as Fluid Loss Controllers in Water Based Mud |
1 |
Islamic azad university, science and research branch | Dr. Tahmasbi | 2015 | MSc | Zahra Norouzi Nasab | Myrtus extracts for rheological modifications in shale formation drilling |
2 |
Sharif University of Technology | Dr. Jamshidi | 2015 | BSc | Mohammad Amin Shirkhani | HPHT additives for improving the thermal stability of polymers in drilling fluids. |
3 |
Sharif University of Technology | Dr. Ghotbi | 2015 | MSc | Mohammad Amin Halali | Improving Temperature Stability of Drilling Fluids Polymers Using Nano Particles |
4 |
Sharif University of Technology | Dr. Jamshidi | 2015 | MSc | M. Rahimi | Simulation the flow rate of aphron-based drilling fluid into the formation and investigation the changes of the formation permeability |
5 |
Sharif University of Technology | Dr. Jamshidi | 2015 | MSc | M. Farahani | Simulation and laboratory study of gas reservoirs formation damage because of consuming drilling fluids containing solid |
6 |
Islamic azad university, Tehran North Branch | | 2015 | MSc | A.Fakhar | SEM analyses for obtaining important qualitative and quantitative parameters and investigating the physical and chemical properties of specialty chemicals and their influences on drilling fluids. |
7 |
Islamic azad university, science and research branch | Dr. Khamechi | 2014 | MSc | Shahin Tabibzadeh | Laboratory study of aphron based drilling fluids on formation damage in the presence of different polymers and surfactants and comparison their performance with ordinary muds |
8 |
Islamic azad university, science and research branch | Dr K. Tahmasbi | 2011 | MSc | Mohsen Pourshahbaz | HPHT water base drilling fluid design with high shale inhibitive capability in order to drill HPHT exploration wells |
9 |
Islamic azad university, science and research branch | Dr K. Tahmasbi | 2011 | MSc | Milad Abdolhesseini Maleki | Development of aphron-based drilling fluids applicable in Iranian oil fields |
10 |
PUT/Curtin | Dr K. Tahmasbi | 2009 | MSc | Behrooz Sadeghloo | Silicate Glycol based drilling fluid further optimization of available formulations |
11 |
PUT/Curtin | Dr K. Tahmasbi, Dr T. Richard | 2009 | MSc | Siamak Haji Hoseini | Drilling bit optimization data analysis |
12 |
PUT/Curtin
| Dr K. Tahmasbi | 2009 | MSc | Ali Karimi vajargah | Development of a suitable formulation of synthetic mud & investigation on its application in Iranian Oil field |
13 |
PUT/Curtin
| Dr Cheetan | 2008 | MSc | Vahid Jame,ie | Shale instability consideration & management during well planning, well construction & post drill stages. |
14 |
PUT/Curtin | Dr K. Tahmasbi | 2008 | MSc | Sadegh Ramezani Sharak | Application of synthetic additives in HPHT drilling fluid systems |
15 |
PUT | Dr K. Tahmasbi | 2008 | BSc | Mehdi Amiri, Amir jahanbakhsh | Oil-based mud & its application in drilling operation in Iran |
16 |
PUT/Curtin | Dr K. Tahmasbi | 2008 | MSc | Akbar Mahjoob | Investigating new model for roller cone bit & effect of impulsive load on the specific energy within the model. |
17 |
PUT/Curtin | Dr K. Tahmasbi | 2007 | MSc | Vahid Razavi | Development of a software for hydraulics calculations in drilling operations |
18 |
PUT/Curtin | Dr K. Tahmasbi | 2007 | MSc | Amir Masood Amiri | Developing a software to design the mud program for Iranian oil fields |
19 |
PUT/Curtin | Dr K. Tahmasbi | 2007 | MSc | Hadi Nejad Hoseini | Formate drivatives application in drilling fluid engineering |
20 |
PUT/ Calgary University | Dr K. Tahmasbi | 2007 | MSc | Sajjad Jafari Chegini | Glycol mud weight optimization & effect of contamination on the system |
21 |
PUT/Curtin | Dr K. Tahmasbi | 2007 | MSc | Hadi Nejad Hoseini | Application of potassium formate based drilling fluid |
22 |
PUT/Curtin | Dr K. Tahmasbi, Prof. R.T Rajeswaran | 2006 | MSc | Hesam Zafari | Application of benchmarking as a tool in drilling fluids management |
23 |
PUT/Curtin | Dr K. Tahmasbi | 2006 | MSc | Mohsen Samaee | Application of new developed drilling fluid to replace oil-based mud |
24 |
PUT/Curtin | Dr K. Tahmasbi | 2006 | MSc | Yaser Purmazaheri | Formation (reservoir damage mitigation by designing drill-in fluids |
25 |
PUT | Dr K. Tahmasbi | 2006 | MSc | Yousef Soleymani | Introducing severe lost circulation materials & application of such materials in Varavi gas field of NICOFC |
26 |
Curtin | Prof. R. T. Rajeswaran | 2005 | MSc | Ali Hooshmand | Selecting an optimum technique for underbalanced drilling operation & different underbalanced drilling design criteria for Iranian oil fields |
27 |
PUT/Curtin | Dr K. Tahmasbi | 2005 | MSc | Vahid Ahmadi | Optimizing UBD operation in order to minimize formation damage & wellbore instability & increase wellbore productivity |
28 |
PUT/Curtin | Dr K. Tahmasbi | 2005 | MSc | Misagh Alnaserian | Modeling of cuttings transportation in high angle & horizontal wells |
29 |
PUT/Curtin | Dr K. Tahmasbi | 2004 | MSc | Mohammad Hosein Hashemi | Cement plug interface stability |
30 |
PUT/Curtin | Dr K. Tahmasbi | 2004 | MSc | Emad Ghazavi | Flow patterns recognition in tubing & riser |
31 |
PUT | Dr K.Tahmasbi, Dr Sajjadian | 2002 | MSc | Saeed Abbasi | Mechanism of gravity drainage in fractured reservoir |
32 |
PUT | Dr K. Tahmasbi | 2002 | BSc | Ali Parsa | Underbalanced drilling |
33 |