is a Bentonite based mud may be used to impart stability to boreholes through soft seabed sediments prior to running structural or conductor casing. 30-40ppb bentonite mud shall be used offshore to sweep top hole while drilling and to spot on bottom prior to running surface casing.

is a water-based drilling fluid (freshwater / seawater) containing guar gum as a viscosifier, typically for top hole sweeps, hole cleaning and for riser less, continuous mixing operations.

Is a water based mud which is formulated by using high molecular Partially Hydrolyzed Poly Acryl Amid (PHPA) as a shale inhibitor in conjunction with high performance polymeric fluid loss control to stability of the system can go up to 257°F.

is a heavy-weight water-based mud which is formulated by using an effective viscosifier to provide flexible, smooth rheological properties in high pressure formations with high calcium/salt water influxes. The system is weighed up to 2.64 S.G. (165 pcf).

Is a high performance water based mud used as a replacement for OBM to overcome high reactivity of shale problems by using different types of glycols and inhibitor salts for low to high formation temperatures to provide stabilization of troublesome shale, minimizing bit balling, increasing ROP and reducing torque and drag. This system has been approved as an environmentally friendly drilling fluids system. The temperature stability of the system goes up to 300°F.

is a water based mud which is formulated by using polymeric fluid loss control in conjunction with potassium chloride to provide shale and clay inhibition, hole stability and minimizing bit balling in shale formations. The temperature stability of the system can go up to 275 °F.

LOW Weight system is a water based mud which is formulated by using hight tech gloss bubbles to reduce the mud weight in sever loss zones the system is stable up to 275’F and provide shale inhibition and reduce the formation damage.

is a high performance HPHT water based mud which is formulated by using special HPHT synthetic polymers and additives to reduce HPHT fluid loss of the system and provide maximum shale inhibition in HPHT wells, and Increasing ROP. This system has a temperature stability of up to 375 °F

Is a high performance synthetic based drilling fluid which is formulated by using degradable synthetic fluids. This system is approved internationally as replacement of OBM is environmentally restricted areas. This system has same shale inhibition performance and temperature stability up to 400°F. This system can be recovered over several usages

Is an oil based mud which is formulated by using high performance emulsifiers and fluid loss control additives to provide a higher temperature stability uo to 350°F, shale inhibition reactivity and reducing torque and drag.

CARBA-DRILL system is non-damaging drilling fluid which if formulated by using high performance water based mud with a high purity calcium carbonate formulated in different sizes to provide optimum bridging in the reservoir. The filter cake and bridges are removable by using an acidizing procedure enabling recovery of the reservoir productivity. This system is also designed to prevent losses during in high permeable zones.

FORMA-DRILL system is a high performance, non-solid water based mud as a drill-in-fluid and completion fluid which is formulated by using different types of formate components for density up to 2.3 S.G(143PCF). It is used in drilling HPHT reservoirs to minimize formation damage and increase well productivity. This fluid can be recoverd and filtered for the next application. The temperature stability of the system goes up to 375’F.

LUB-DRILL is a water-based drilling fluid system is used in directional drilling for reducing coefficient of friction, torque, drag, bit balling and increase ROP. It also minimizes the possibility of differential sticking in high deviated wells.

TORQUE-FREE is a water-based drilling fluid system is used in horizontal drilling for reducing coefficient of friction, torque, drag and bit balling. It also minimizes the possibility of differential sticking.

is a high performance, non-solid water-based mud as a drill-in-fluid & completion fluid which is formulated by using different types of salt components for density up to 2.3 S.G. (143 pcf). It is used in drilling HPHT reservoirs to minimize formation damage & increase well productivity. This fluid can be recovered & filtered for the next application. The temperature stability of the system goes up to 375 ̊C.

WELL PLUG System is a lost circulation water based fluid which is compatible with all types of drilling fluids and is formulated by using synthetic bio-polymers and borate minerals to overcome Extreme Lossesin fractured and high permeable zones.